Coloured body

With pattern, colour and texture,
We let the same pattern and colour to run through the surface and body of tiles,
Present a more complete structure.
The whole tile has the same look in-and-out,
Achieving a more balanced and harmonious feeling.

Excellent Slip Resistance

With the concept of "Human-oriented",
We combine the functionality and visual design,
Which are of utter importance in interior design,
To enrich every human design.

Specification

This tile has high slip resistance (R9, R10 or R11 as specified on the logo) with test conducted in Hong Kong (DIN 51130 : 2003-08) with CoF ≥ 0.60 (ASTM C1028).

The ceramic tiles are produced by three-dimensional cloth technology, using a wet color mixing and coloring system, and the surface of the glaze body is the same, and the processing is more flexible.

The ceramic tile has been drilled and polished for five times and burned slowly at high temperature. It is more wear-resistant and durable, and is not easy to break. The hardness is close to Mohs 6, which is much higher than the national standard.

The water absorption rate of tiles is less than 0.1% (ASTM C373, EN ISO 10545-3), which is far lower than the 0.5% required by the national standard.

The ceramic tiles are produced by three-dimensional cloth technology, using a wet color mixing and coloring system, and the surface of the glaze body is the same, and the processing is more flexible.

The ceramic tile has been drilled and polished for five times and burned slowly at high temperature. It is more wear-resistant and durable, and is not easy to break. The hardness is close to Mohs 6, which is much higher than the national standard.

The water absorption rate of tiles is less than 0.1% (ASTM C373, EN ISO 10545-3), which is far lower than the 0.5% required by the national standard.

Comparison

Q&A

1. Some people say that the VersaTiles Series are particularly suitable for processing. Is that true?

If you pay attention to every detail and strive for perfection, you are especially recommended to use VersaTiles tiles from the whole body non-slip series for steps, footlines, countertops, etc., which need to be processed according to the size. Since the tiles in this series are full-body tiles, the color and pattern of the tile surface and the brick body are consistent, so there is no need to worry about the need to expose the brick body, and it can be processed with confidence to become the tiles used in the above-mentioned places without sacrificing the beauty.

2. Where is the VersaTiles Series suitable for?

The tiles of the VersaTiles full-body anti-slip series have the most outstanding anti-slip function, and the thickness of the tiles can be up to 20mm. Therefore, the tiles of this series are also commonly known as "outdoor tiles". The anti-slip performance is good, and the tolerable damage strength is high. It is most suitable for outdoor places such as rooftops, gardens, and parking spaces.